Newb with electrical question
So I changed the alternator bushings. Didn't like a vibration so i did it again today while I was at it i put in the new battery. My questions is.......There are two wires-one on each battery terminal...these two wires come together with a white plastic connector.....Where does this connector plug into?
Took bike on a ride ...vibration gone......bike started backfireing and doing all kinds of crap and died....battery juice gone...3 blocks from home.......my son had helped wash the bike and I noticed water inside the filler area....I drained the tank completely....little to no water found in gas...I'm going to charge the battery but I think I need to push the white connector where it goes.....
Does the bike crapping out like that sound consistant with water in gas or does it sound like the white connector caused my dimise?