Looking for Help - Autocom install in Schubert C2 helmet - K-Bikes.com - Excellence in Motion
LinkBack Thread Tools Display Modes
post #1 of 2 (permalink) Old Apr 11th, 2006, 6:36 am Thread Starter
Join Date: May 2004
Posts: 91
Looking for Help - Autocom install in Schubert C2 helmet

I started to install the autocom in a new C2. I removed the 2 screws that supposedly hold in the cheek pads but I'm not able to separate the pads from the helmet to get access to the liner. I've looked over the autocom fitment instructions but I've found no other suggestions. I had no problem installing the autocom in my old C1. Does anyone have suggestion on how to loosen the cheek pads?
ten is offline  
Sponsored Links
post #2 of 2 (permalink) Old Apr 14th, 2006, 3:27 pm
Join Date: Apr 2004
Location: , ,
Posts: 51
I did mine a few months ago.

The side piece has a back tail that dovetails under the main foam piece. It is also partially glued.

Pull and wiggle it down and forward. You will also have to detach some of the glue on the cloth.

They also tell you not to remove any foam for the ear speaker installation.
If you don't, you won't be able to fit you head back into the helmet when you are done. I'm sure they put that in there to CYA for insurance reasons.

I removde mine with a Dremel roto-tool.

I purchase last years model without the individual volume controls. I wear foam ear plugs and my wife doesn't. I had to go to the custom ear plugs with speakers built in to hear anything. I have since removed the speakers and left only the mike.

If you have the new model, that's no longer an issue.

Good luck.

PS. Make sure your sun visor works before you button it up.
StevieVVet is offline  

Quick Reply

Register Now

In order to be able to post messages on the K-Bikes.com - Excellence in Motion forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome