K75RT oil pan leak question - K-Bikes.com - Excellence in Motion
 
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old Nov 29th, 2015, 6:11 am Thread Starter
Noob
 
Join Date: Nov 2015
Location: Stamford, CT, United States
Posts: 1
K75RT oil pan leak question

New to site. Lots of great stuff here. 91K75RT- just turned 40k miles in the deep woods of ME.

Q - My oil pan cover is leaking. I assume its due to O ring seal, or dirt, or warping of actual cover. I also recently upgraded to dealer synthetic oil. I've drained the oil twice, cleaned all the bolts, screws, and everything that could possible have dirt on or in it. It's still leaking. I noticed a huge improvement in engine performance with new oil, but is that part of the problem(viscosity?) Any suggestions?

Also, I bought Mobil oil filter and Synthetic 15W-50 oil to try out instead of dealer synthetic. Read some positive reports on it. Any thoughts welcome and I know this might stir the pot a bit.

Thanks, and glad to be here
Rob
Robrides50 is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old Dec 1st, 2015, 3:31 pm
Addict
 
Join Date: Mar 2004
Location: , , UK
Posts: 3,750
You could try checking surface flatness using a sheet of float glass and some engineers blue. It's not uncommon for cover surfaces to distort with heat cycling.

Most oil leak problems are caused by lack of preparation and keeping the mating surfaces clean and oil free, until contact with O ring or gasket by the cover is made.



Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!
voxmagna is offline  
post #3 of 3 (permalink) Old Dec 3rd, 2015, 9:26 am
Veteran
 
H96669's Avatar
 
Join Date: Jun 2009
Location: Burton, British Columbia, Canada
Posts: 1,620
M6x20 bolts? Or did someone install longer ones as in 25mm after stripping some of the threads? The 25mm may bottom out just as they start putting some pressure on the cover.

New O-ring for $2.94? Your post doesn't say if it was replaced.

Worse case scenario and the cover is warped,11131460229 is the part number. Pretty well applies to ALL the Ks so there are a few cheap ones on fleabay.Mind you a new one is $21.13 according to Max's parts fiche.

Benelli 50cc at 14
Yamaha RD 200 at 16
Yamaha RD 350 at 17
Honda CB 750 F at 18
Honda V45 Sabre at 24
BMW K100RS at 27
BMW R100GS at 34
BMW K1200RS at 53
H96669 is online now  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the K-Bikes.com - Excellence in Motion forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Oil leak question & what are these lines..? hyvltge Technical, Repair and Maintenance 2 Dec 17th, 2015 3:10 pm
'92 K75rt injection computer question (there's a hole in the bucket) dietbrand Other K-Bikes Discussion 0 Jul 26th, 2012 4:41 am
Oil pump leak - oil pressure switch? Sripev Other K-Bikes Discussion 18 Jul 13th, 2010 6:35 pm
Trans rear seal leak question Librarian Technical, Repair and Maintenance 10 Aug 23rd, 2009 1:36 pm
Oil Leak Question ktran K1200RS/GT (Classic) 8 Feb 12th, 2006 10:22 am

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome