Join Date: May 2005
Location: New Brunswick, NJ, USA
You'll still want to get something for the brake and clutch fill circuits.
I bought the speedbleeders and did it by Gary's instructions. That would be:
2 x SB8125L Fronts
1 x SB1010S Rear
1 x SB1010S Clutch
Having to start all over again, I'd just buy the rear (SB1010S) and use the stock to do the fill circuits where there are grub screws now. You'll probably want a friend on hand to open and close some of the bleeders.
Also, make sure you have a bleeder on the left front caliper. I read somewhere, that they used to leave a grub screw in there.
"This is like deja vu all over again." by Yogi Berra