front wheel stand suggestions - - Excellence in Motion
LinkBack Thread Tools Display Modes
post #1 of 7 (permalink) Old Mar 26th, 2010, 12:34 pm Thread Starter
Join Date: Mar 2010
Location: goshen, ct, usa
Posts: 32
front wheel stand suggestions

i am looking for a front wheel stand for my 2002 k1200rs
the factory stand#363970 is about $450 , i am not paying that
anyone have any info on front wheel stands such as pit bull and i see some adv on the discount ramp website
any info good and bad will be greatly appreciated
bke7 is offline  
Sponsored Links
post #2 of 7 (permalink) Old Mar 27th, 2010, 5:13 am
Douglas_C's Avatar
Join Date: Oct 2006
Location: Edinburgh, , UK
Posts: 39
Depends what you want it for?
This system works for wheel cleaning, tyre or disc pad changing etc.
Shown on my K1100, but works fine on my K1200

Douglas C.
1998 K1200RS
1968 Triumph T120
Douglas_C is offline  
post #3 of 7 (permalink) Old Mar 28th, 2010, 4:39 pm
flyingkiwi's Avatar
Join Date: Dec 2008
Location: Port Macquarie, NSW, Australia
Posts: 381
I use the same method, but screw the timber "posts" to a board to improve stability. Has done me well for eight years.

2002 K1200RS Owned from new. Pacific Blue, Ohlins. 183,000km’s
2016 K1300R Black, Remus hexacone. 6000km’s
The family history
1951 AJS 500 single - my Dads
1916 Triumph Type H, Western front, France WW1 - my Grandads
flyingkiwi is offline  
Sponsored Links
post #4 of 7 (permalink) Old Mar 29th, 2010, 12:13 pm
Yoda's Avatar
Join Date: Aug 2009
Location: , Wild Rose Country, Canada
Posts: 104
A lot cheaper than 450 .....
Yoda is offline  
post #5 of 7 (permalink) Old Mar 29th, 2010, 12:25 pm
Sharkbait's Avatar
Join Date: Aug 2007
Location: Santa Rosa, CA, USA
Posts: 461
I use a Pitbull with my K1200R and it works fine.


’06 K1200R Corbin w/ smuggler, Wilbers shocks, PCIII, Factory Pro Dyno tuned, CC Suspension plates, Vario levers, Dual Evo filters, Leo Vince SBK, V1, Zumo 550

’02 WR250F Stock

’99 SV650 GSX-R front end, Aftershocks suspension, Penske shock, 41mm FCR flat slides, Bridgestone slicks, M4 exhaust, Vortex clipons, Woodcraft rearsets, Hot Bodies race bodywork, Factory Pro clutch cover, Total Loss ignition, BRG relocated battery, APE Adjustable Cam sprockets, JE 13:1 pistons, mild porting, balanced crank, Sunoco 110 race fuel

’98 KLX331 Race Tech suspension, 331 Stroker big bore kit, 33mm pumper, Tag bars, Stroker exhaust, IMS desert tank, tall seat foam w/ Stroker cover, Open air box, KX clutch
Sharkbait is offline  
post #6 of 7 (permalink) Old Mar 29th, 2010, 12:38 pm
Douglas_C's Avatar
Join Date: Oct 2006
Location: Edinburgh, , UK
Posts: 39
Originally Posted by Yoda
Yes, but not listed for the K1200RS?

In the uk there a number of options available, including this type:

Douglas C.
1998 K1200RS
1968 Triumph T120
Douglas_C is offline  
post #7 of 7 (permalink) Old Apr 2nd, 2010, 12:54 pm
Join Date: Mar 2004
Location: , , UK
Posts: 3,750
I bought a Chinese 'pitbull' for about $60.

But both in my view suffer the same bad design in that they use a fitting either side which the fork tubes rest on. When you are working on the bike the forks could move off the supports.

The solution is simple: Buy cheap Chinese, a length of M10 screwed rod and some nuts. Once the rod is pushed through the forks and eyes on the stand it's not going to go anywhere. I've also found my stand can be reversed, which is great for access to the rads and everything up front.

Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!
voxmagna is offline  

Quick Reply

Register Now

In order to be able to post messages on the - Excellence in Motion forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Absolutely the most detailed description of the K1200S I've come across... sinc K12/1300S 20 Jul 19th, 2014 9:04 am
Front Wheel Removal mixdude K12/1300GT (Next Gen) 9 Apr 14th, 2009 6:39 pm
removing front wheel on KR for tire change aznatama K12/1300R/R-Sport 5 Sep 5th, 2008 11:56 am
Front Wheel Stand magellan44 K1200RS/GT (Classic) 31 Sep 13th, 2006 11:45 am
I found the 22mm hex for the front wheel... Shelley K12/1300S 9 Nov 16th, 2005 10:35 am

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome