Need fuel pump assembly (and tank) to replace '99 unit - - Excellence in Motion
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old Jan 7th, 2006, 11:57 pm Thread Starter
Join Date: Mar 2004
Posts: 10
Need fuel pump assembly (and tank) to replace '99 unit

My '98 k12rs must have had water collecting/sitting in the bottom of the tank (despitemy storing it inside) and the bottom of the tank is the fuel pump assembly, right?
The result is that the water rusted the plate including up under the seal, and rusted the surface enough so it los its smooth surface and seal and the tank started leaking at the plate/gasket.
Being my machine is a '98, which did have the early recall done for the tank replacement (but it is still one which has the bolts in the bottom versus the later one with the plastic ring nut.
So, I must replace the plate assembly The fuel pump and connecting components are all in tact and working), and would like to replace the tank as well if I can find a used one woth the plastic wing nut fraom a wrecked/parted out beast. Anybody out there that has such or can point me to someone who might have these?
Thanks- Jim Stergas
jims is offline  
Sponsored Links
post #2 of 3 (permalink) Old Jan 8th, 2006, 1:36 pm
Just saying hey
Join Date: Apr 2004
Location: , ,
Posts: 8
02' spare tank complete

MY 02'k12rs was totaled over the summer, I was rear ended. Stripped bike clean of all
useable parts, bike only had 9K on her. I have your gas tank and its complete. Looking
to sell her off one piece at a time, so I can put it towards another K bike in the spring.
To me its like scattering her ashes out there, to live again in spirit.

Glad to be still here : Jeff
jeff_ny is offline  
post #3 of 3 (permalink) Old Jan 11th, 2006, 4:29 am Thread Starter
Join Date: Mar 2004
Posts: 10
Wink Jeff- tank assembly


Thanks for the reply.

Sorry to hear you got hurt on the bike, and hope you are mending okay now (especially hope your neck and back are doing okay).

Your bike is an '02 correct? It has the large nylon/plastic lock nut configuration I am assuming? I need to check and make sure the '02 tank fits the '98 bike, unless you know for sure that it does. What do you need for the tank with the fuel assembly?

Jim Stergas
jims is offline  

Quick Reply

Register Now

In order to be able to post messages on the - Excellence in Motion forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Need fuel pump assembly (and tank) jims Bike Talk 2 Jan 7th, 2006 11:54 pm

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome