Goodridge steel brake lines - - Excellence in Motion
LinkBack Thread Tools Display Modes
post #1 of 9 (permalink) Old Jan 4th, 2007, 5:06 pm Thread Starter
Join Date: Aug 2005
Posts: 242
Goodridge steel brake lines

My brake lines arrived from the UK to Colorado, took about 2 1/2 weeks but that was through the holiday season, so it probably would have been faster otherwise, anyway I wanted to share the high quality of the brake lines. They arrive as a kit, I arranged it all on the table to get a good pic, the yellow things at the top were protective covers which I took off the ends. This kit is for the 97-01 K1200RS.

this is the link-

I don't see where they have a kit for the next two generations, but for those of you who have the earlier bike like me, you may be interested. Super nice people, they respond immediately to emails, a real pleasure to deal with.

Cheers, Jack
Attached Thumbnails
Click image for larger version

Name:	goodridge brake kit.jpg
Views:	72
Size:	88.5 KB
ID:	4442  

Last edited by frisco99; Jan 4th, 2007 at 7:51 pm.
frisco99 is offline  
Sponsored Links
post #2 of 9 (permalink) Old Jan 5th, 2007, 9:59 am
Join Date: Dec 2005
Location: Dumfries, , Scotland
Posts: 41
Had Goodridge lines on my 97 for a year now, big improvement over the spongey rubber lines. Very high quality. ( Stainless fittings are the best. )

In the UK get them from

Fitted them myself, fairly easy, tricky bit is bleeding the system.


97 BMW K1200RS ( Stock )
01 Aprilia RSVR ( Far from stock )
bigmadstu is offline  
post #3 of 9 (permalink) Old Jan 5th, 2007, 10:50 am
Join Date: Mar 2004
Location: , , UK
Posts: 3,750
This line kit is great, but for a kit sold specifically for the K1200RS, they should be putting in aluminium washers as per oem, not copper normally for steel to steel. After 18 months install with their copper washers I can start to see the tell-tale signs, particularly on the top brake reservoir (aluminium). I'll be swapping them out on my next service.

Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!
voxmagna is offline  
Sponsored Links
post #4 of 9 (permalink) Old Jan 5th, 2007, 11:22 am Thread Starter
Join Date: Aug 2005
Posts: 242
clutch line

Vox, just sent you a PM regarding a clutch line made by Goodridge I noticed on the link posted above, any info on that, where it goes etc. Might make a nice addition to round out the hose replacement task. The Goodridge kit is really nice, I can go down to the hardware store and snag some aluminiumninm washers no problem.
frisco99 is offline  
post #5 of 9 (permalink) Old Jan 5th, 2007, 10:15 pm
Join Date: Jun 2006
Posts: 39
Goodridge brake lines

How does the cost compare to the Siegler lines the Pirate sells?
Allen Turner
AllenTurner is offline  
post #6 of 9 (permalink) Old Jan 6th, 2007, 10:22 am Thread Starter
Join Date: Aug 2005
Posts: 242

For the kit I got, 5 lines, no clutch line, it was 151 British Pounds which was $310 at the time, for the kit and the shipping from the UK to Colorado. There is apparently a Goodridge clutch line available as well, I noticed it on the Busters website, I am trying to find out if that is the line that goes from the front left handgrip/reservoir back to the clutch master cylinder under the battery. That might be nice, but the diameter would have to be thinner than the brake lines presumably.

Last edited by frisco99; Jan 6th, 2007 at 10:36 am.
frisco99 is offline  
post #7 of 9 (permalink) Old Jan 7th, 2007, 5:19 pm
Join Date: Aug 2004
Location: , ,
Posts: 296
Stainless Hoses

BMW uses copper washers at their banjoes, at least in in the USA.
54089093 is offline  
post #8 of 9 (permalink) Old Jan 7th, 2007, 8:07 pm Thread Starter
Join Date: Aug 2005
Posts: 242

I play a little banjo myself.
frisco99 is offline  
post #9 of 9 (permalink) Old Jan 8th, 2007, 1:10 am
Looking for better limits...
Razel's Avatar
Join Date: Jun 2003
Location: Fremont, CA, USA
Posts: 5,163
Was it on your knee?

100% free webcam site! | Awesome chicks and it is absolutely free! | Watch free live sex cam - easy as 1-2-3

2010 K1300GT Royal Blue
2003 K1200GT Orient Blue (for sale)
2007 G650 X-Challenge

IBA #34158

Be a K-Bikes Supporter

I work for Keyser SŲze
Razel is offline  

Quick Reply

Register Now

In order to be able to post messages on the - Excellence in Motion forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Absolutely the most detailed description of the K1200S I've come across... sinc K12/1300S 20 Jul 19th, 2014 9:04 am
ABS power Brake Problem Solved The Fllash Technical, Repair and Maintenance 2 Aug 7th, 2010 9:33 pm
Stainless Brake Lines Titto K1200RS/GT (Classic) 5 Dec 15th, 2006 2:58 am
Stainless Steel Brake Line Fitment nigeldav K1200RS/GT (Classic) 7 Apr 8th, 2006 4:08 am
03 K1200 RS steel braided lines 03k12RS K1200RS/GT (Classic) 7 Mar 4th, 2006 7:34 pm

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome