BMW K1200, K1300, and K1600 Forum banner

Resetting the Fuel consumption calculation on K1200GT

2K views 3 replies 4 participants last post by  jennyanams 
#1 ·
Hi All,
just thought I'd post it here so anyone searching for it might be assisted.

My fuel consumption calculation on the BC was showing fairly high at 6.7 Ltr per 100Kms. It had crept up from 5.2Ltrs over a period of time. I was doing a lot of work on the bike and had it idling a fair bit, plus was only doing very local trips. I wanted to check if the O2 sensor was dodgy. Rather than disconnect the battery, I was able to figure out how to reset it. I could only find reference to the older models on the net.

Anyway, when the consumption figure is displayed, hold down the BC button until the display changes to ----

Job done, it will start recalculating.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top