Installation advice for Garmin 2820 and V1 - K-Bikes.com - Excellence in Motion
 
LinkBack Thread Tools Display Modes
post #1 of 1 (permalink) Old May 12th, 2009, 7:38 am Thread Starter
Noob
 
Join Date: Jul 2008
Location: Cuyahoga Falls, Ohio, USA
Posts: 18
Installation advice for Garmin 2820 and V1

This has been addressed here and there in the past but hoping for some input and advice.
I recently purchased a Garmin 2820 and a Valentine 1. Now my issue is the best way to mount and wire these. In the past I've considered mounts that use the available hole near the grips but I've found that I really prefer having to just glance down when riding rather than looking to the side.
Also, I've read in previous posts issues with CAN bus problems due to adding accessories. I've also seen 'fuse blocks' (I believe) mentioned in posts.
Any advice, things to avoid or watch for, input from someone that may have a Garmin and V1, anything at all would be appreciated. Guess I had better mention that this will be on a '07 GT.

One last thing that I wondered if someone could enlighten me on. Years ago I always had a radar detector in my car. I'm not a crazy speeding maniac, but sometimes I don't like to go 55 or 60 or sometimes I'm just not paying attention to my speed. I gave up the detectors when lasers started becoming more popular with the LEO's. The radar detector really didn't give me much piece of mind when I realized that I could still be picked up by a laser and never know it. So, what do others do about this? Do you just concern yourself about radar and take your chances with laser, hoping that there just aren't many out there? I live in NE Ohio and just about every time I see the local police out on the four lane, they're using lasers (just got my first speeding ticket in twelve years last fall, from a laser). I know that there are laser jammers, but then you end up with your bike looking like a shelf at Best Buy. Also, here in Ohio, you can't drive much more than a half hour on the interstate without seeing the state troopers or the locals. It's big business here. Anyhow, was wondering what others do. I don't neccessarily want to cruise at triple digits all day but holding my speed at 60 or 65 is somewhat frustrating.

Thanks for the help and advice I'm sure I'll be receiving.
jaylenowannabe is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the K-Bikes.com - Excellence in Motion forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Garmin 2820 Vs Zumo 550 jazx83 GPS 10 Jun 3rd, 2009 10:24 am
Installation advice for Garmin 2820 and V1 jaylenowannabe K12/1300GT (Next Gen) 8 May 14th, 2009 12:32 pm
Installation advice for Garmin 2820 and V1 jaylenowannabe Radar Detector 0 May 12th, 2009 7:37 am
Garmin 2820 timg K12/1300GT (Next Gen) 7 Aug 21st, 2006 2:07 pm
2820 + voice comm -- best solutions? JLane GPS 1 Jul 15th, 2006 8:46 pm

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome