New GS Bar Pic - K-Bikes.com - Excellence in Motion
 
LinkBack Thread Tools Display Modes
post #1 of 7 (permalink) Old Nov 20th, 2007, 10:03 pm Thread Starter
Member
 
EzyMount's Avatar
 
Join Date: Jul 2003
Location: Franklin, NC, USA
Posts: 89
Lightbulb New GS Bar Pic

Note, this is an unfinished bar....production will be black powdercoat.

The new bar will mount anyone out of about 11 possible PIAA or other lights to predrilled mounting holes, or a single 10mm hole to accomodate the powersports lights and many other brands of lights that utilize single bolt mounts. Again, you can mount top / bottom / or both.

Bar is back in shop for clean-up, slight cosmetic mods and sum other stuff, including fabrication of the adapter kit that will allow you to move the factory aux light to my bar if desired.
Attached Thumbnails
Click image for larger version

Name:	PA200350_small.jpg
Views:	217
Size:	40.0 KB
ID:	6653  

Jim Lawson
00 K1200LTC
Ezy-Mount Products
Auxiliary Light Mounting Solutions
www.ezymount.com
EzyMount is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old Dec 8th, 2007, 2:47 pm
Veteran
 
jpalamaro's Avatar
 
Join Date: Apr 2005
Location: Jacksonville, FL, USA
Posts: 1,582
Quote:
Originally Posted by EzyMount
Note, this is an unfinished bar....production will be black powdercoat.

The new bar will mount anyone out of about 11 possible PIAA or other lights to predrilled mounting holes, or a single 10mm hole to accomodate the powersports lights and many other brands of lights that utilize single bolt mounts. Again, you can mount top / bottom / or both.

Bar is back in shop for clean-up, slight cosmetic mods and sum other stuff, including fabrication of the adapter kit that will allow you to move the factory aux light to my bar if desired.
I hope you are talking about a mount for the R12GS Adventure. There are available options for the GS but NOT the Adventure. That's where it's needed, BTW, go on ADVRIDER.COM and you will see there's pent up demand for this.

John
Jacksonville, FL, USA
jpalamaro is offline  
post #3 of 7 (permalink) Old Dec 11th, 2007, 8:00 pm Thread Starter
Member
 
EzyMount's Avatar
 
Join Date: Jul 2003
Location: Franklin, NC, USA
Posts: 89
Yes.

John,

Yes, it will mount to the GSA and there will be an adapter kit that will allow those with factory aux lights, to move them to my bar and still mount other lights on opposite side.
I've been tracking that site for some time and see that I have some new competition, as of this week...

Jim Lawson
00 K1200LTC
Ezy-Mount Products
Auxiliary Light Mounting Solutions
www.ezymount.com
EzyMount is offline  
Sponsored Links
Advertisement
 
post #4 of 7 (permalink) Old Dec 11th, 2007, 8:05 pm
Veteran
 
jpalamaro's Avatar
 
Join Date: Apr 2005
Location: Jacksonville, FL, USA
Posts: 1,582
Quote:
Originally Posted by EzyMount
John,

Yes, it will mount to the GSA and there will be an adapter kit that will allow those with factory aux lights, to move them to my bar and still mount other lights on opposite side.
I've been tracking that site for some time and see that I have some new competition, as of this week...
Keep us informed Jim. I currently have the Adv foglights factory installed. I have my PIAAs mounted via PIAA's universal/ATV mount, under the beak. Heavy shock/damping the PIAAs will just 'touch' the hugger/fender so am not ecstatic with the setup.

John
Jacksonville, FL, USA
jpalamaro is offline  
post #5 of 7 (permalink) Old Dec 11th, 2007, 11:10 pm Thread Starter
Member
 
EzyMount's Avatar
 
Join Date: Jul 2003
Location: Franklin, NC, USA
Posts: 89
Smile Production

My production order goes out either Wed or Thursday of this week. Still getting quotes for new hardware, so final pricing not confirmed yet.

Jim Lawson
00 K1200LTC
Ezy-Mount Products
Auxiliary Light Mounting Solutions
www.ezymount.com
EzyMount is offline  
post #6 of 7 (permalink) Old Dec 25th, 2007, 12:21 pm Thread Starter
Member
 
EzyMount's Avatar
 
Join Date: Jul 2003
Location: Franklin, NC, USA
Posts: 89
Talking Pics Are Up !

Go to

http://www.ezymount.com/kits/whats_new.htm

Pics and pricing details have been posted...

Jim Lawson
00 K1200LTC
Ezy-Mount Products
Auxiliary Light Mounting Solutions
www.ezymount.com
EzyMount is offline  
post #7 of 7 (permalink) Old Dec 31st, 2007, 1:30 pm Thread Starter
Member
 
EzyMount's Avatar
 
Join Date: Jul 2003
Location: Franklin, NC, USA
Posts: 89
Thumbs up Production Shop Update..

Visited shop just before Christmas to see progress..

Not as far along as I would have liked, but back-order of T6 stock was partially to blame.

Final s/w updates had been put into computer and finalized.

Good news was, most of the Boot-Clamp sets have been completed and await final cut. (most difficult part of job)

Main bar cutting/shaping begins on the 2nd of January.

Kit H/W will be in sometime next week.

Packing/shipping material has already been delivered.

Half of production run is spoken for, as of just before Christmas.

If you are interested and want to make sure you are in on the first run, take another look at http://www.ezymount.com/kits/whats_new.htm

and send an email to [email protected], to reserve a kit.

I have not priced shipping costs to Canada or Europe yet, those charges will obviously be higher. When I am able to establish those numbers, I will let you know.

Hope you all had a Merry Christmas and get the New Year off to a great start this evening, unless this catches you after midnight, if so

Happy New Year !

Jim Lawson
00 K1200LTC
Ezy-Mount Products
Auxiliary Light Mounting Solutions
www.ezymount.com
EzyMount is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the K-Bikes.com - Excellence in Motion forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome