|Topic Review (Newest First)|
|Sep 19th, 2006 5:47 pm|
Let me know how I can help.
|Aug 26th, 2006 6:13 pm|
|Aug 25th, 2006 1:14 pm|
Originally Posted by eljeffe
|Aug 25th, 2006 8:42 am|
I have the UltimaXL connected to a phone, Garmin 376C GPS, and two-way radio. Regarding the needed cables for the GPS, you will need to decide whether you will connect to the stock Garmin cable (with the bare wires on one end), or to the audio-out jack (which is either a 2.5 or 3.5mm jack - can't recall which). If connecting to the stock Garmin cable, go to your local electronics store for a female connector and connect it to the audio pair. Either way, the Baehr cables have full isolation and will be noise-free.
About connecting the Baehr power, I connected mine to an auxilliary fuse panel that is always hot. The Baehr powers down when the helmet cable is disconnected.
|Aug 24th, 2006 7:35 pm|
I have a Baehr Verso XL and had the 2610 (and now the 2820) installed with it on my K1200S. It works great.
You don't need to buy a Baehr helmet (its actually a Shuberth anyway). You can have the mic and headset installed in many different helmets. I have them installed in my Shoei X-11 (X-Spirit in Europe) and in my Shoei Z-One.
|Aug 20th, 2006 7:49 am|
|eljeffe||Check with RaffyK (one of the admins here). He knows a lot about the Baehr system and can most likely answer any of your questions.|
|Aug 20th, 2006 6:35 am|
I am thinking of a BAEHR intercom like ULTIMA or other. Does it what promises or ...?
Also thinking of a BAEHR helmet with intercom from same company. Does it functioning, quiet helmet they claim, or shall I install one in my old ARAI ?
Most important how can electrically connect my old GARMIN Street Pilot 2610 to my new K ?
Should I make attachements directly to battery or ...?
Thanks in advance