|Topic Review (Newest First)|
|Mar 6th, 2006 12:54 pm|
autocom PTT button location & attachment
Does anyone has pictures/description of how they attached an Autocom Push to Talk button on a K12RS?
|Feb 25th, 2006 11:23 pm|
I have an Autocom Active 7 Smart system (k1200RS) and I use the B2B, Cell, and an MP3/XM (depending on the ride). I love it! I can not think of anything simpler and better functioning. My buddy and I use motorola talkabouts and have only had minimal problems. The only problem I have had was with the radio. There is a two pin connector to the radio but the radio has a bit of a shape conforming bump that kept the contact from being made properly, Dremel to the rescue! A bit of shaving of the bump and it works perfect, is merely cosmetic, and barely noticeable.
As for my install, I only had the bike for a week and had no plan on what to do... I was still riding within a half hour of the box being delivered to my house. I went on my own for the setup... I ran the power wires direcly to the battery (the system is not powered unless the helmet is plugged in), I wrapped the unit with bubble wrap and then put it in a plastic bag (I always worry about vibration and water). I know some advise against closing the system due to heat, but I have not had any problem. The whole wrapped unit is held onto the frame (left side) by a Zip tie. I still have access to both knobs and it has never moved from it's mounted location.
I hope this gives you some answers to your questions.
|Feb 25th, 2006 10:52 am|
I wanted a very basic and inexpensive bike to bike system so I bought a set of re-pack Uniden FRS radios from my local Drug and everything else store for only $39 Cdn (About $30 US). I then purchased two MC-555 headset/mic/PTT outfits from Motocomm for $59 US each (see https://www.rflimited.com/Default.asp). The whole system works very well for up to 2 miles.
As I mentioned in another post regarding helmet speakers, I was able to buy an adapter plugs from Radio Shack (called The Source now) which allow me to plug into my portable radio or other devices when I am riding solo.
|Jan 3rd, 2006 10:15 pm|
Questions about installation of Autocom on K1200RS
Guys: I was in SF recently, trying to help a pal hook up an Autocom to his 2004 K1200RS. Unfortunately we did not have enough tools, light, or time to do anything more meaningful than take off the seat and poke around and stare at the wires in there.
I gotta confess, I cannot see any use for an Autocom in a K12, which I consider to be a "day fighter." You want to be totally focused on what is going on around you; you don't want your head full of tunes or "in the cockpit." Still, my pal thinks that he needs this thing.
Who has a really sanitary installation? Any tips? Photos?
Thank you in advance.
|Dec 1st, 2005 7:22 am|
AutoCom on Sale
Originally Posted by DangerMoney
AutoCom is having a sale on the Pro 7, 50% off!
|Nov 25th, 2005 1:50 pm|
Just picked up 2 X1's ! We'll see come spring time . It makes sence to me ,, no extra wires
to fart with , right on the helmet nice and neat like . Hopefully Chatterbox has listened to some of the responces from buyers and made some adjustments to what I think is a good idea .
|Nov 6th, 2005 9:07 pm|
I have the Pro 7 as well and have been using my cell phone for over a year. Works perfect every time. You don't need an isolator because the phone runs off its own battery. I have been on the highway cruising over 80mph and have had no problems receiving or talking.
|Nov 6th, 2005 8:44 pm|
|DangerMoney||I have an Autocom Pro7. For fun I hooked up my cell phone, put it in auto-answer while standing in the garage with my helmet on and had my wife call me. It works.|
|Nov 6th, 2005 1:46 pm|
Chatterbox LAME with Cell phones
I bought a Chatterbox from some knucklehead outfit in California that (it turns out) also sells martial arts equipment . My primary reason for getting it was so I could use my cell phone (receive calls & talk, never dial out...) while on long trips. The Chatterbox worked fine with a CD player, and for intercom, but the supposed cell phone integration was worthless. After screwing around with their tech support , buying additional/replacement cables, and even swapping the entire unit with the factory, I ended up returning the whole thing.
The caveat is that there are only specific phones that will work correctly. They told me mine WOULD work before I purchased it. No dice. In addition, with all of the return hassles, I ended up being charged multiple times for a product that I had returned, so I had to challenge the charge on my credit card, then some *&^%!## in their A/R department called me more than once to give me a load of &*^%!
Why doesn't BMW (or anyone else!) make a better line of integrated products that actually work! I've seen these exotic European products that look like they have 50 wires coming out of them
Anyone have recommendations for something that will work for a cell phone first and foremost, then audio (CD), GPS, and intercom?
|Nov 3rd, 2005 5:30 am|
|brucev||I have the Auto-Com setup using Kenwood radios. I have had it for two years and all works perfect. I did not hard wire any of the equipment. At the time I had another bike and wanted to swap easily. I electrified the tank bag and run power from the accessory outlet. I do not run any of the equipment on batteries. They just don't last. Auto-Com had all the needed hardware to run everything off the bike. I have riding friends that use Chatterbox. As stated previously they work well with limits. It will depend on your budget and what performance you need. If you want no issues go with Auto-Com. You will certainly pay more but the old saying you get what you pay for is true with this equipment.|
|This thread has more than 10 replies. Click here to review the whole thread.|