What resistance should there be on the rear wheel speed sensor please?
Hiall, can anyone help. Just bought a 2007 K1200S with 25k miles on it and a recon abs module with warranty but on my first ride today the dreaded red brake failure light came on.
Well starting with the simple things before panicking too much, I checked the calipers, pads and stuff, and I found the back brake disc had cut a tiny nick into the rear wheel hub all effect sensor wire. On testing the continuity it showed about 2.8 M ohms which seems dodgy.
Does anyone have a correct continuity reading ?
|All times are GMT -5. The time now is 9:08 pm.|
K-Bikes.com is powered by: vBulletin Version 3.8.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright © 2007, Enthusiast Communities, LLC