BMW K1200, K1300, and K1600 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hi,

I recently bought 6000K LED Auxiliary Flood Lights Lamps Kit for BMW K1200RS.
Today my mechanic said that it is a problem installing such led light since there is not enough room for them and it may harm the from fender while the suspensions fully work.

please note that the picture of the LEDs is not exactly the one that installed on the motorbike...

The manufacture mention that it fits K1200RS all years, my mechanic cause me to think twice, what do you say, guys, do you have experience with this or similar products?

https://rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https://www.ebay.com/itm/6000K-LED-Auxiliary-Flood-Lights-Lamps-Kit-for-BMW-K1200RS-all-years/253547062163?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160727114228%26meid%3D80bf1e078f524ff89f865cd1a3ec85d7%26pid%3D100290%26rk%3D2%26rkt%3D4%26mehot%3Dlo%26sd%3D132198937705%26itm%3D253547062163&_trksid=p2060778.c100290.m3507&campid=5338299892&toolid=20008

Thanks

Guy
 

Attachments

·
Registered
Joined
·
2 Posts
Guy,

I have an 04GT set up exactly as in your photo (w conventional PIAA Lamps). I made a couple of AL brackets and mounted using existing fasteners, It has been that way for 10 years and 35K miles (CA twisties etc.) and there has been no interference or body contact. Pics attached.
That setup has worked great for me.
Best Luck.
NR
 

Attachments

1 - 3 of 3 Posts
Top