BMW K1200, K1300, and K1600 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter #1
Are these the clutch balance paint marks Im looking for when reinstalling the clutch? I know 120deg apart, but I want to make sure Im doing this right

Yellow/brown

purple

white stripe
 

·
Registered
Joined
·
2 Posts
Just did a clutch replacement on my K1200rs. Took me a couple tries but I finally got it right. I was a bit confused about the clutch balancing...so that led to an incorrect and unbalanced install. Found the two white paint marks on the pressure plates, oriented them exactly 120° apart and everything is spinning smoothly. The two plates are what you need to pay attention to. Don't forget to grease your splines.
 

·
Registered
Joined
·
2 Posts
Looks like there's a faint white mark close to the purple one in your pic. I would go with the white mark as the paint on my parts is also white only.
 

·
Registered
Joined
·
18 Posts
Discussion Starter #4
Thanks for the heads up. I ended up getting it all aligned properly. I took plenty of pics and that was what helped me the most. I made sure to make my own Mark's if there is a next time.
 
1 - 4 of 4 Posts
Top