BMW K1200, K1300, and K1600 Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
178 Posts
Stephejl said:
But the screw type the dealer uses are fuel line type clamps with the screw perpendicular to the hose, right? The clamps we're discussion are the worm type with a large screw tangential to the hose. I use the clamps you're describing extensively on my bikes. --Jerry
Those are listed as fuel injection clamps. If you are installing quick disconnects, you will want to have the removeable clamps for theose ocassions when an O-ring fails in the disconnect, or the disconnect itself breaks. Carry a pair of double ended barbed connectors for such emergencies.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top