BMW K1200, K1300, and K1600 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
I just replaced the rear pads, new steel braided lines and speed breeders on rear (fronts are next) I filled up the rear reservoir opened sb and bled brakes until running clear no bubbles. I closed bleeder valve step on brake pedal and it goes to the end of trave no resistance. I can look at the rear pads and see they haven't closed at all.

Any ideas of what I did wrong?

Thanks in advance
 

·
Registered
Joined
·
559 Posts
Trofy said:
I just replaced the rear pads, new steel braided lines and speed breeders on rear (fronts are next) I filled up the rear reservoir opened sb and bled brakes until running clear no bubbles. I closed bleeder valve step on brake pedal and it goes to the end of trave no resistance. I can look at the rear pads and see they haven't closed at all.

Any ideas of what I did wrong?

Thanks in advance
Detailled reply done on the "other K forum" (I-BMW.com) where he also posted the same question.
 
1 - 3 of 3 Posts
Top