BMW K1200, K1300, and K1600 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
104 Posts

·
Addict
Joined
·
3,750 Posts
That's a useful link - Thanks.

All I would add is if you get a glazier to cut the glass using the same thickness mirror, run some varnish around the outside edge to seal the exposed mirror foil else you will get water creep in from the sides. If you are worried about whether it should be toughened glass or not, back the mirror with duck tape, but one stick only DON'T peel it off and remove the silvering coat!



Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!
 
1 - 3 of 3 Posts
Top