BMW K1200, K1300, and K1600 Forum banner
1 - 1 of 1 Posts

· Registered
1 Posts
I resurrected this thread for 2 reasons...

1) A couple of people have recently mentioned it, the symptoms at least..
2) I just did it myself.

On the way back from the dealer (yea yea I know) :( , I turned it off outside the garage and went to restart it and two slow turns died off to nothing.. At gas stations it would be slow but would eventually fire up. Since I'm heading to Newfoundland and Labrador in a week I figured it might be the smart thing to do ;)

It's pretty easy, get a 8 or 10 gauge wire and connect it from the positive battery terminal down to the relay (red wire). YES there's a physical relay. It's located under the air box on the left side. Then, run the same gauge wire from the relay (black wire) to the terminal on the side of the starter. You do not remove any stock wiring. Just run them parallel allowing more current to travel. Yes I already have an odyssey battery that stays on a tender. Ran the bike around a while in 90 degree temps and now she refires just as quick and strong as when cool 👏

Hey, how did you connect to the cable into the relay?
1 - 1 of 1 Posts