BMW K1200, K1300, and K1600 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Can anyone tell me, please, which is the distance between the fixing holes of the front mudguard to the fork of a k1200rs 2003? This is the "a" distance from the attached image. Many thanks in advance.
 

Attachments

·
Registered
Joined
·
426 Posts
220mm, give or take a couple as I don't have calipers to measure that distance... but I've gotta ask :D why do you want that measurement :dunno: Very curious...
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
flyingkiwi said:
220mm, give or take a couple as I don't have calipers to measure that distance... but I've gotta ask :D why do you want that measurement :dunno: Very curious...
Thank you very much mate! :clap:
The reason I need to know the distance is that I'm modifying my R1100GS replacing my stock wheels (front 19" with wire spokes) with 17" alloys and the stock fender will be too large in the new setup. I found one on ebay but I was not sure that it will fit my R1100GS forks. Now it seems it will be OK :teeth
 
1 - 3 of 3 Posts
Top