BMW K1200, K1300, and K1600 Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter #1
Hello all,

I've got a 2007 bmw k1200gt and the previous owner replaced the final drive with a unit from a 2010 k1300s. I plan to change the final drive oil next weekend and I can see the drain plug, but where do I fill from?

Thanks!
 

·
Registered
Joined
·
362 Posts
Remove the rear wheel and on the final drive, you will see a 6mm hex bolt on top. I always remove the fill bolt before the drain just in case it gets stripped. The drain should be a T25 Torx. Also, the fill for the final drive is 180ml.
 

·
Registered
Joined
·
362 Posts
- Torque Specs -
Final drive drain bolt - 20nm
Final drive fill plug - 20nm
Rear Brake caliper - 24nm
Front brake caliper - 30nm
Wheel bolts to hub - 44 ft/lb
Oil Drain Plug - 28nm
 
1 - 5 of 5 Posts
Top