BMW K1200, K1300, and K1600 Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Has anybody installed one of these universal deflectors? The clamps do not come installed on the deflector, there is no paperwork of any kind, and I’ll be damned if I can figure them out. It appears that the clamp hardware needs to come apart in order to install but there is nothing obvious...
 

Attachments

·
Registered
Joined
·
4 Posts
It looks like the pix show a clamp pre assembled, the screen has two pre drilled to attach the screen deflector mounting hardware to, an Allen key and two small bolts and nuts per mounting bracket. The remaining mount slips over the top edge of your existing bike screen and that is also secured with screws by an Allen key,
Once on set to suit your requirements, should be able to see over it and a target on the road in front about 25 away..
Set it at approx the same angle as your current screen.. cheers
Ps, I had one on my Bonnie america with good results
 
1 - 2 of 2 Posts
Top