BMW K1200, K1300, and K1600 Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
I've just bought a Laser Hot Cam Titanium for my K1200S. Little or no instructions in the box. Just a single sheet with pictures of fitting.

I've worked most of it out now.Taking of the factory Can is very straight forwarard. The linking pipe that joins the manifold to the new can is a reaaly good fit, very high quality.

My problem is what do I do with the two short springs that I found in the bag of bits that came with the can?! There doesn't seem to be any obvious place for them and the illustrations don't even mention them.

If any one has fitted one of these I would appreciate some advice. Maybe I'm missing something?

Liam

2005 K1200S, Granite Grey
2003 R1150R, Atlanta Blue
 

·
Registered
Joined
·
505 Posts
The springs are to attach the can to the intermediate pipe between the exhaust header and the can. These are some photos of my Akrapovic, but it should be the same with your Lazer. Needle-nose pliers work well for this.
 

Attachments

1 - 2 of 2 Posts
Top