BMW K1200, K1300, and K1600 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
258 Posts
Discussion Starter #1
Just had my software upgraded and I can not get to neutral with the engine started. Just for clarification - I do not mean I can't get the green "N" light to come on - my problem is that my neutral gear is gone. Works just fine with power on (or without) but I have no neutral with engine running. I did not have this problem prior to the upgrade so I am thinking it must be related.
Question for all of you out there - has anyone else experienced this? If so, what was the fix
Thanks in advance for the help.
 

·
Registered
Joined
·
324 Posts
the 6.0 upgrade would have nothing to do with neutral (it is not a "gear" but a lack of "gear"). did you or the dealer move the clutch lever position? try turning the adjuster knob in and testing the clutch.
 

·
Registered
Joined
·
258 Posts
Discussion Starter #3
thanks

Thanks for the response. I actually had not thought of this (duh) but had also had a different clutch lever installed at same time. Clutch seems to be in adjustment but it may be enuff off that it is not allowing me to get neutral. Will check with dealer this week.
 
1 - 3 of 3 Posts
Top