BMW K1200, K1300, and K1600 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
There are three "wire baskets" that hold the turn signal assembly to the studs on the fairing.

Most of the wires are broken off, and the rings are gone.

I could use new baskets or a new turn signal assembly that has them intact.

Thanks
Tim
 

·
Registered
Joined
·
34 Posts
There are three "wire baskets" that hold the turn signal assembly to the studs on the fairing.

Most of the wires are broken off, and the rings are gone.

I could use new baskets or a new turn signal assembly that has them intact.

Thanks
Tim
Go down this route and life gets expensive

The backing piece can be bought separately and has two wire baskets on it - the third one is on a different part

I've been buying bits to get my pods to stop wobbling but if I had my time again I'd go magnets

I've had no sucess at all trying to find the baskets as a part
 
1 - 4 of 4 Posts
Top