BMW K1200, K1300, and K1600 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
437 Posts
Discussion Starter #1
i'm gonna flush my brakes and want to use speedbleeders on my '04kgt. looks like 2 on front, one on rear. what speedbleeders do i buy?
 

·
Registered
Joined
·
1,507 Posts
billbeemer said:
i'm gonna flush my brakes and want to use speedbleeders on my '04kgt. looks like 2 on front, one on rear. what speedbleeders do i buy?
Bill
Go to www.speedbleeder.com for all the info.
But to tell the truth it's very easy to bleed the wheel circuits using the stock bleeder screws.
 

·
Registered
Joined
·
43 Posts
You'll still want to get something for the brake and clutch fill circuits.

I bought the speedbleeders and did it by Gary's instructions. That would be:
2 x SB8125L Fronts
1 x SB1010S Rear
1 x SB1010S Clutch

Having to start all over again, I'd just buy the rear (SB1010S) and use the stock to do the fill circuits where there are grub screws now. You'll probably want a friend on hand to open and close some of the bleeders.

Also, make sure you have a bleeder on the left front caliper. I read somewhere, that they used to leave a grub screw in there.

"This is like deja vu all over again." by Yogi Berra
 
1 - 3 of 3 Posts
Top