BMW K1200, K1300, and K1600 Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
My TPMS units front and back have gone totally dead. For a while they would go out intermittently and now they no longer report anything. I ordered some aftermarket ones off ebay it turns out that they weren't properly labeled as to what value I needed to program into the bike with the GS911. I have since ponied up for the factory TPMS sensors but prior to doing this I had deleted the values from the TPMS module using the GS911 tool. My thought process was that maybe this would clear the light until I fixed things properly. Does anyone know of step by step directions on how to read these tpms sensors and finally put this problem to bed for good?
 
1 - 1 of 1 Posts
Top