BMW K1200, K1300, and K1600 Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
238 Posts
Discussion Starter #1
I had a 2730 and it worked fine with my Autocom. It died so I bought the 665. The problem is the volume is about 15% lower than the 2730 and I can't hear music, directions, etc. at speed. Have any suggestions? I have the Autocom cranked all the way up and the 665 at 100% volume.
 

·
Registered
Joined
·
373 Posts
I bought a amp at one of the BMWMOA national rallies for under $100 a few years ago. Now, I can only crank the volume up to about 25%. Can't remember the manufacturer, but the bike show is next week in Chicago. Check some of the vendors.
 

·
Registered
Joined
·
100 Posts
If you are into soldering electronics you may increase the amplification in Autocom.

You replace the 9V regulator with a 12V and then you change the value for 4 resistors.

One option that I have not tried my self, which may work, is to replace the stock speakers 32Ohm with 8Ohm speakers from Autocom.
 
1 - 3 of 3 Posts
Top